Instructions

Quick Instructions, Printing, Cutting and Heat Press

Cutting Instructions.

TDF has  a film mylar film liner. Reduce your blade depth to 1/2mm.

Blade: 100% Carbide 45° Degree, Offset 250, Speed 30 cm/second

Force: 45 – 50 gm.

Blade Depth: Start with 1/2mm.Do not score liner.

The liner should not be scored. Cutting deeply enough to score the liner will degrade the quality of the cut, making it more difficult to weed.

Do a TEST CUT, please.

 

Heat Press Settings.

Common settings for all fabrics.

300°F-310°F , Time 10-12 Seconds, Pressure Medium (60 psi).

Suggest press 4 seconds, then release and press 6 seconds.

Sensitive Fabrics. 250°F – 300°F, Time 8-10 seconds, Pressure Medium (60 psi).

Experiment with a small piece of fabric before committing to an incorrect setting.

TDF adhesive begins activating at 250°F.

 

Nylons:

Common Settings.  300°F-310°F

With Parchment Paper

Pre-heat 30 seconds.

Put transfer film on fabric while it is warm.

Heat 20-30 seconds using,  Medium Pressure (60 psi).

Peel Warm to Cold. Do not Peel when Hot.

Final Press. With Parchment, cover transfer film and press  10 seconds.

 

 

Printer Profiles.

Roland.

ICC Profiles. THT for fast processing

TTRH- Slower

HM11 also works good.

Shut off Printer Pre-Heater.

dpi at 360-720. No more.


Mutoh.

ICC Profiles. Use 3M, Oracal, Mactac, keep at 360-720 dpi.


Mimaki.

dpi: 540 x 720

Pass: 6 passes

Direction: Bi

Pre-heater: 35°C (95°F)

Print-heater: 35°C (95°F)

After-heater: 40°C (104°F)


HP Hewlett Packard. HP-L22550

-Select the “paper aqueous” setting.

-Use Poster Paper ICC profile.

-Cure temp set to 70°c

-Dry temp set to 45°c

 

Product Film Instructions.

TDF – MSDF Sheet.pdf Click on icon to download

TDF-1011and1012Descriptionand Instructions.pdf Click on icon to download

TDF-1013SilvrRefledtiveInstruction.pdf. Click on icon to download

Meets EN 471 Standard.


http://www.youtube.com/watch?v=m1tCW-ftAU8


TDF-1015Descriptionand Instructions.pdf. Click on icon to download

All TDF heat transfer films meet the Oeko Tex Standard, they are all RSL Compliant, safe and reliable.


Oeko Tex® Standard.

http://www.oeko-tex.com/OekoTex100_PUBLIC/index.asp



Warranty

Products manufactured by TDF Films Group distributed through Digital Apparel Marketing Solutions are warranted to the extent of the original manufacturer’s warranty. Any product found to be defective will be replaced upon return of the unused defective product. Our liability is limited to product replacement only. Digital Apparel Marketing Solutions are not liable for indirect or consequential damages arising from the use of any of our products. Warranty does not apply to defects caused by accidents, misuse, abuse, tampering, improper storage or out of data product.

Return Policy

Upon delivery one to one exchange or 30 day refund will proceed. Offsetting order, 20% restocking fee and return shipping charges required.